Why should you buy from us?
There are many reasons. Click below and find out.
Tell me

Refill & Save!
Refill your own HP or Lexmark cartridges and save big with our easy to use refill kits.
See list of refill kits

Cleaning Cartridges
Clean your printer regularly and get better printing results. Is your printer streaking? Are you seeing white lines in your printout? These will help.
See cleaning cartridges

Tell A Friend
To offer lowest prices possible we rely on word of mouth advertisement.
Tell your friend about us

No Credit Card?
NO PROBLEM
You may order via mail by filling out short order form and enclosing check or ...
Tell me more

OPEN 24/7
For your shopping convenience we are always open. No more trips to local store and no more time wasted standing in those long lines at the register.

If you would like to find out what else we do to satisfy our customers please click here.

• White lines occur when printing documentations or pictures.
• Indistinctness or broken lines occur in nozzle check pattern.
• Ink does not come down during printing.
• Printer is used again after a long period of disuse
• It is to be used before replacing normal ink cartridge
• Life of print head can be prolonged with regular cleaning.

Using steps:

• Take out the cleaning cartridge from the poly bag, and tear off the yellow part of the sealing film.
• Install it as same as replace a new ink cartridge.
• Clean five times according to printer operation instructions, print with the cleaning cartridge, if there is no broken lines, and pictures are clear in nozzle check pattern or test printing page, then cleaning is finished.
• Repeat step (3) if broken lines or indistinctness of pictures and words still occur.
• If step (4) still does not work, let the cleaning cartridge stay in the printer for 12 hours before turning on the printer and repeat step (3), if print head still cannot return to normal, that means it is already damages and needs replacing.
• Take out the cleaning cartridge after the cleaning, install a new ink cartridge, clean print head twice and the printer is ready to use.
• Wipe off the liquid from the cartridge with tissue paper and seal the liquid exit with the provided sealing stopper (Fig2), put the cleaning cartridge into the sealing bag with liquid exit downwards (Fig3), seal the bag and put it back into the box for further use.

Notice:

• Seal the used cleaning cartridge with sealing stopper to prevent the liquid from drying.
• Don’t put unsealed cleaning cartridge anywhere to prevent the environment from being polluted.
• Take off the sealing stopper from the used cleaning cartridge before it is installed for another use.
• Don’t expose the print head in air too long to avoid being damaged.
• The colored liquid in the cleaning cartridge is for testing only, not for normal printing.
• One cleaning cartridge can be used for at least 10 times.
• The expiry is six months after first use

No damage will be done to print head if the cleaning cartridge is used according to the current directions.

* Note: Set of instructions similar to one above will be included with your order.

Cleaning Cartridge

Sealing Stopper

Sealing Bag

Tissue Paper
[ FIGURE 1 ]

Sealing Process
[ FIGURE 2 ]

Sealed Cartridges in Poly Bag

[ FIGURE 3 ]