Why should you buy from us?
There are many reasons. Click below and find out.
Tell me

Refill & Save!
Refill your own HP or Lexmark cartridges and save big with our easy to use refill kits.
See list of refill kits

Cleaning Cartridges
Clean your printer regularly and get better printing results. Is your printer streaking? Are you seeing white lines in your printout? These will help.
See cleaning cartridges

Tell A Friend
To offer lowest prices possible we rely on word of mouth advertisement.
Tell your friend about us

No Credit Card?
NO PROBLEM
You may order via mail by filling out short order form and enclosing check or ...
Tell me more

OPEN 24/7
For your shopping convenience we are always open. No more trips to local store and no more time wasted standing in those long lines at the register.

If you would like to find out what else we do to satisfy our customers please click here.

Use for Lexmark - 12A1970, 1361400, 1380620, 12A1145, 13620HC, 13400HC, 1382050, 17G0050

Contents: 1 Cartridge holder, 1 screwdriver, 1 needles, 1 ink syringe(20ml)

Using steps:

1) Put the cartridge unto the cartridge holder with the flange facing inward see fig 1

2) Use the screwdriver to enlarge the small hole on the cap and make sure it is large enough to insert the needle see fig 2

4) Substitute the sealing cap of the syringe with the needle, take off the cap of the needle and insert the needle deep into the cartridge, then depress the plunger slowly until the cartridge is full (about 12, 15ml) and take down the syringe afterwards. see fig 3, 4, 5.

4) Take the cartridge out of the holder, clean the nozzle with tissue paper, then reload the cartridge into the printer and run the head cleaning utility 2-3 times before printing test or nozzle test.

Notice:

Make sure that the ink in the cartridge has already run out, although no completely, before refilling.

Printing results will be affected if the cartridge dries or is damaged.  If printing results do not become normal even after step 4 is repeated for several times, leave the cartridge in the holder or the printer overnight before performing printing test or nozzle test again.  If it still remains abnormal, the print head is already damaged and cartridge will have to be replaced.

* Note: Set of instructions similar to one above will be included with your order.

Cartridge Holder, Mini-Screwdrivers, Needle, Syringe with Ink.

[Figures 1 & 2]

[Figures 3 & 4]

[Figure 5]