Why should you buy from us?
There are many reasons. Click below and find out.
Tell me

Refill & Save!
Refill your own HP or Lexmark cartridges and save big with our easy to use refill kits.
See list of refill kits

Cleaning Cartridges
Clean your printer regularly and get better printing results. Is your printer streaking? Are you seeing white lines in your printout? These will help.
See cleaning cartridges

Tell A Friend
To offer lowest prices possible we rely on word of mouth advertisement.
Tell your friend about us

No Credit Card?
NO PROBLEM
You may order via mail by filling out short order form and enclosing check or ...
Tell me more

OPEN 24/7
For your shopping convenience we are always open. No more trips to local store and no more time wasted standing in those long lines at the register.

If you would like to find out what else we do to satisfy our customers please click here.

12A1980, 1380619, 12A1140, 17G0060, 13619HC, 15MO120, 1382060

Contents: 1 Cartridge holder, 1 screwdriver, 3 needles, 3 syringes (20ml/each), 1 label

Using steps:

1) Put the cartridge into the cartridge holder, and stick the label into the cartridge in the direction indicated by the arrow on the label.  (The colors on the label are correspondent with the colors of the ink.  The three holes on the label are the positions for drilling filling holes on the cartridge.) ( see fig 1) 

2) Drill three holes on the cartridge vertically from the positions indicated on the label ( deep to about  8 - 10 mm) see fig 2

3) Take out the related syringe (color of the label indicates color of the ink) Substitute the sealing cap from the syringe with a needle.  Insert the needle into the corresponding hole and depress the plunger slowly until the cartridge is full (about 5-8ml). see fig 3, 4, 5

4) After refilling take the cartridge out of the holder and clean the nozzle with tissue paper.  Then reload the cartridge into the printer and run "head cleaning" utility 2-3 times before printing test on nozzle test.

Repeat steps  to fill the ink for a second time.

Notice:

Make sure that the ink in the cartridge has already run out (although not completely) before refilling.

Printing results will be affected if the cartridge dries or is damaged.  If printing results do not become normal even after step 5 is repeated for several times, leave the cartridge in the holder or the printer overnight before performing printing test or nozzle test again.  If it still remains abnormal, the print head is already damaged and the cartridge will have to be replaced.

 In step 3, the color of the ink must be corresponding with the color indicated on the label in case of wrong filling, the cartridge will be damaged.

* Note: Set of instructions similar to one above will be included with your order.

Cartridge Holder, Needles & Label

Syringes with Ink, Mini-Screwdriver

[Figure 1]

[Figures 2 & 3]

[Figures 4 & 5]